Home

Subcategories

  • Photoluminescent signalisation
    PHOTOLUMINESCENT MARKING This section presents a selection of the most popular photoluminescent products available on our site, related mainly to marking. You will find more products and versions in sizes and colours in the other category groups of our website
  • PHOTOLUMINESCENT BAND LLL
    The references which width is 2.5 cm, 5 cm and 10cm are in stock. Delivery in 48h. Definition: Low Location Lighting "Low Location Lighting or emergency exit guidance system is designed to provide to people easy and coherent informations to guide them in good order from any location to a designated gathering point." NF X08-050-2
  • Phosphorescent paints
    SCROLL DOWN TO FIND ALL OUR PRODUCTS !! All phosphorescent paints are colourless during day and 95% transparent. It's usually recommended to apply them over a white background. We make different types of photoluminescent paints. HOW TO CHOOSE ? - According to application methods (roller, brush or spray) - According to its destination (inside, outside, wood, cars body...) - According to desired properties (resistance, waterproofness) - According to harmfulness criteria: water paint are more comfortable to use TIPS TO GET A GOOD PHOSPHORESCENCE? (Parameters to take into account) - Adequate number of passes (at least 3) - Total darkness (no ambient lighting) - Time and type luminous recharge - Light colour background (white rather than dark) - A strong phosphorescent colour rather than a low one (green rather than purple) - Temperature (heat excites phosphorescent effect whereas cold inhibes it) All products below are in stock in different colours and sizes SEE THE PRODUCTS BELOW : « How long does a phosphorescent paint glow » is a frequently asked question: colours with strong intensity such as blue green and green charge very quickly and can glow during several days. Their luminosity will simply decay gradually with the hours. In concrete terms, these same colours will still be visible in a dark room, after a full night. Wear over time is almost nonexistent, as the lifetime of phosphorescent products can exceed 15 years for most of them. It is important to note that phosphorescent products are generally intended for indoors, as they need complete darkness to fully work. The luminous pollution released by lamposts and lightings in urban areas has to be avoided. In all cases, it should be taken into account that only the blue green and green colours will give long and satisfactory levels of luminosity. To find further informations on phosphorescence, please visit our blog. For very specific questions, our technical team can be contacted by email.
  • FLUORESCENT PAINTS
    The fluorescent paints are well known by everybody for their flashy and bright colours. The word phosphorescent is often confused with fluorescent! Phosphorescent paints are the ones which glow by night. The fluorescent paints, thanks to a molecular chemical process, reflect more light (thus more colour) than they receive. They are part of the photoluminescent paints family.
  • BLACKLIGHT PAINTS
    Invisible fluorescent blacklight paints (BlackLight or UV) produce luminous or luminescent colours, when they are illuminated by ultraviolet light of which waves range between 365 and 395 nanometers. This product is available in 3 different sizes: - 60ml Moonglo bottle - 60ml Moonglo Kit of 4 bottles - 250ML and 1L Pots For higher packing, please contact us directly by mail
  • PHOSPHORESCENT TAPES
    Roll of photoluminescent adhesive tapes in flexible Vinyl PVC, or photoluminescent flexible aluminium tape, by the meter, to stick on all smooth surfaces (floors, walls, equipments)
  • DECORATION
    Various phosphorescent objects and materials for decoration and design. Nowadays the photoluminescents items designed for indoor and outdoor decoration becomes more and more fashionable. The real advantage of these product is their ecologic aspect : No maintenance, no toxicity, no energy consumption
  • PHOTOLUMINESCENT EMERGENCY EXIT SIGN
    Photoluminescent safety markings The only luminous signal that is infallible and that doesn't need any maintenance ! The photoluminescent signals and adhesives for emergency evacuation charge very quickly under any kind of light and will glow longer than it took them to load up. They don't need any care nor electrical power and have a very long lifetime. A simple cleaning is sufficient.
  • SWITCHES
    Practical, effective and lasting, the adhesives for switches are intended for homes and business premises as well.
  • STAIR NOSING
    The photoluminescent stair nosings allow the marking of steps in the dark and to prevent risks of falls. They charge very quickly to natural or artificial light (1 minute of exposure to light will give 30 mn of luminance). They release the stored energy in the form of light in the dark. Stair nosing is composed of an aluminium cast and of an anti-slip and phosphorescent plastic strip. In comparison with the photoluminescent adhesives (that can be easily removed) or with the electrically powered luminous stair nosings (necessitating expensive equipment installation), the aluminium stair nosing is the most reliable, economical and durable solution: phosphorescent stair nosings do not require much maintenance other than a simple wipe, and the efficiency of their photoluminescence lasts more than 20 years! Consequently, they are recommended for establishments open to the public, that want to be compliant with safety requirements, such as hotels, museums, theatres and cinemas. The thickness of the photoluminescent insert (6 mm) and the screw-secure fixing system of the stair nosing allow them to support during many years the heavy and daily foot traffic. Note: We also provide separately the plastic part (insert) if requested.
  • PHOTO PAPER
    PHOTOLUMINESCENT PAPER FOR PRINTING How does it work ? The pictures printed on this special paper will be as good as the ones printed on glossy classic photo paper. During the night, the pictures will be illuminated from the inside: The clear zones will be more or less lit, luminous and coloured, while the dark zones will stay opaque and gloomy. Thus it is recommended to print in shades of grey (black and white) Like any photoluminescent product, it will perfectly work in total darkness and won't be able to be seen in semi-darkness (except during the few minutes after it has been excited under a strong light)
  • PHOTOLUMINESCENT ADHESIVE FILM
    All our photoluminescent adhesive films are in stock and shipped within 48 hours in UK. They are available in different grade classes: Class C (European standard), Class D (very strong) and Class E (for maximum intensity - available on order only) The rolls are available in 1m wide x 25 m length. We also propose cuttings per square meter. All our products meet European legal requirements for photoluminescence and are subject to ongoing laboratory testing (Flammability resistance, Adhesion and Abrasion testing, UV resistance, Salt spray resistance, Luminance factor). For companies and wholesale orders, please contact us by email and provide us with your VAT number
  • RETRO REFLECTIVE TAPE
    Retroreflection technologies is the property to reflect directly back at the source of the light, directing it through a spherical optical element, like glass micro-bead. We propose retro-reflective tapes but also some more specific tapes, that have both retro-reflective AND phosphorescent properties. Some of our tapes are retroreflective sew-on tapes. Most of our tapes are available in full rolls. Our products are intended for professionals, and for local authorities and private individuals as well. To place an order for several pieces, please do not hesitate to request us for a quotation by email. We can propose attractive prices and conditions according to quantities. We also accept administrative payment orders. The retro-reflective can be applied on most of smooth surfaces and strongly adhere without risk of tearing. All our products have been designed and developed to resist to weather conditions (rain, sun, heat, frost…)
  • Retroreflective paint
    StardustColors ECHO paint provides durable maximum retroreflective efficiency, and can be applied over all types of supports: You will find the application guide, pictures and available packagings in the product page below
  • PANEL PVC, ALU STEEL
    The PVC boards are semi-rigid, with an average thickness of 1.3mm and are available in Class D (strong) and Class D (very strong). All the models size 15x35 or 21x29 or 100x100 are blank, in stock and available immediately . We can also print any type of patterns, for a minimum quantity order of 50 pieces.
  • INFRARED INK AND X-RAY
    Infrared ink reacts by creating a green luminescence when exposed under an infrared source in the 980nm range
  • Phosphorescents Stones
    Used for decorating gardens or inside homes, they produce an amazing magical effect.
  • PRIMERS AND CLEARCOATS
    The products present in these category are necessary to apply and / or protect certain of our photoluminescent paints. They are : basecoat, adhesion primer, thinner, cleaner, or topcats
  • Luminescent road and cycle path
    You surely do not know that there are light signaling materials, functional for a hundred years, and which do not require any electricity supply? Have you ever heard of phosphorescent paint for the visibility of outdoor courses? During the night, in or outside cities, and in the absence of lampposts, one could imagine a luminous road for pedestrians or cyclists, to guide them and help them identify obstacles. The phosphorescent cycle path is a way to reduce accidents, and also a way to achieve big energy savings. Over the next few years, modern man will seek all means to save and preserve our sources of energy. In cities, turning off lights (light pollution) in the last part of the night, will undoubtedly be one of these measures. City dwellers will then have the chance to take a luminescent cycle path and contemplate the starry sky, but they will also have to find new means, economical, sustainable and respectful of the environment, to find their way in the dark. Our photoluminescent products represent a perfect alternative, as they can create phosphorescent cycle paths by a completely natural process that does not require any maintenance or power supply, and whose lifespan is well over 50 years. Signage, luminous road and phosphorescent cycle path for the creation of a luminescent cycle path, photoluminescence and a "green" solution which has the following advantages efficiency in the dark Durability of the phenomenon beyond fifty years. Economical, resistant and autonomous Requires no power or maintenance Performance without decay Weather resistant does not create light pollution The company ARCO IRIS specializes in photoluminescent signage and offers phosphorescent equipment and materials that can be used outdoors, to create photoluminescent routes or a phosphorescent cycle path, for example. Phosphorescent paint for light signaling PHU2K paint is a certified two-component polyurethane acrylic which is resistant to all weather conditions and abrasion / trampling. It provides a very long durability. It was developed and used for Eurotunnel and is somewhat suitable for all media Phosphorescent tiles: it is the strongest photo-luminescent material for exteriors possible, from a mechanical strength as well as weather resistance point of view. It may be suitable for marking the course of a phosphorescent cycle path. The gravel: These are compounds based on pigments and glass, crushed in different sizes, which can be incorporated into the surface of concrete and cement to create luminous roads. the silicone lines: They can be inserted into the road. They are flexible and resistant. Nails: They are extremely strong and durable, small and very economical. Phosphorescent stones: Different sizes, their natural appearance is indistinguishable from natural stones. Yet they shine at night. They can be incorporated into surface floors. Aluminum bands They are very economical, easy to stick, flexible and resistant. They can deliver a very high level of phosphorescence. Flat pebbles Available in 3 colors, these flat and large sized hard PS stones mimic natural stones very well and have unique shapes. Reflective and phosphorescent studs Both reflective, because they are fitted with reflectors, and at the same time phosphorescent in the mass, they are perfect for signaling phosphorescent pedestrian or cycle routes. Phosphorescent resins: These are very hard epoxies after mixing and drying, which allow a phosphorescent thickness to be cast. The solution to fight light pollution Luminous pigments offer countless possibilities for creating "luminous exterior paths" that are easy to recharge with light. Thanks to this The solution to fight against light pollution, many street lights and public lighting could therefore be shut down. ARCO IRIS offers a tailor-made design and manufacturing service: We can achieve according to your drawings, with our various specialized partners, the manufacture of your equipment, from the materials with which we work: aluminum, stainless steel, certain plastics and our phosphorescent resins. Create a phosphorescent map to guide ONF hiking trails The luminous materials based on Strontium aluminate are particularly effective when the darkness is intense. This is precisely the case in natural spaces, hiking trails, natural parks, forests. Luminous aluminum plates were used to Create a phosphorescent map for guiding ONF hiking trails Arco Iris produces these plates printed with the constellation map for the French forest office. The light cards are recharged throughout the day with natural light, and the phosphorescence is observable throughout the night. ----------- Create a sign with phosphorescent Phosphorescent tactile signage Phosphorescent watches
  • Photoluminescent adhesives
    Photoluminescent adhesives are normally used as safety devices and photoluminescent signals and markings for the evacuation of people from buildings, industrial sites, ships, trains, theaters... These products must comply with the NF X 08-050-2 standard And so they must have the following characteristics: Minimum luminance properties: For safety signals, the required minimum luminance in Europe is class C. Our products are available in class C and class D (higher class). We manufacture adhesives that can reach class E. The dimensions are of varying sizes as we can cut the rolls in a variety of widths (minimum 2.5 cm) Strength characteristics are also very important: Fire resistance (flame resistance) should be high: For this we don't use PET adhesive but PVC vinyl, whose resistance is much more higher, especially against bad weather (heat, rain, frost). The product is completely waterproof and enough resistant to friction, abrasion and cleaning (including all types of detergents commonly used). Our products have successfully passed salt mist tests (NF EN ISO 9227) Please contact us to get the test data and reports For outdoor applications, flexible adhesive tapes have an estimated average life expectancy of 1 year. For maximum durability (several years), our aluminum strips should be used. Application recommendations are given in our product and PDF data sheets: The application is made on dry, clean, dust-free and completely exempt from grease substrates. Best adhesion is obtained on smooth surfaces. Maintenance: Photoluminescent products don't require any special maintenance other than keeping them clean (regular dusting is recommended to ensure optimum brightness. Cleaning is done with a mild detergent). Nevertheless, it's advised to check regularly the system performance
  • PHOTOLUMINESCENT PIGMENTS
    Meant for the industry sectors, the phosphorescent pigments have the capacity to store and emit light: they load up with light (sun, electrical, UV) and release slowly the stored energy by glowing in the dark. Definition* : the word photoluminescent covers in general all types of pigments that can emit light thanks to a luminous excitement. Thus, to be more precise, we will talk about phosphorescent pigments. LUMINANCE : The pigments glow over a variable period of time and in a quick decay curve, that will stabilizes itself during long hours. The luminance is measured in microcandela/sqm. The luminance can totally extinguish days after an excitement to light. The intensity of the glow will depend of the size of the pigment particle and of its colour: green particles are larger and will glow longer. ASPECT : The pigment powders are colourless during the day TYPES OF PIGMENTS : We deal with the biggest choice of pigments, available in several models according to their colours, the size of the particles and their type (solvent or water based) We also produce a range of pigments coloured by day (please contact us by email only) ORDER: The easiest and quickest way is to order via our site (payment by check, credit card, wire transfer). Volume discount prices. Please contact us for a pro forma invoice. Send us an email to get a quotation for big quantities/ to get the full degressive price list For further informations about the preparation of the pigments and how to incorporate them, please see our PDF technical data sheets. Also ask for our technical application files (Application in Paints and coatings, Application in Inks, Application in Plastics)
  • Fluorescents pigments and dyes
    Fluorescent pigments are available in more than a dozen different colours, packed in 1kg to 25kg bags (quick delivery 48h). They are coloured powders, highly concentrated, harmless, and quite easy to incorporate into plastics, paints or other. These pigments are fully compatible in aqueous phase or solvent. No grinding is required, they are mixed with any transparent medium, preferably by stirring. Pigments, as opposed to dyes, are insoluble very fine particles (below 15μm). Dyes are more specific products, which have the particularity to dissolve instantly and completely in some solvents only. That’s how they display a perfectly translucent colour of highest purity. You can find all of the necessary information on the product pages and in the pdf file below.
  • Epoxy Resins and "River Table"
    We offer a selection of the best epoxy resins to make glazes or castings. Easy to use, the two-component epoxy resin offers many advantages over other resins (Polyester, Polyurethane, etc.): it is odourless, non-toxic, doesn’t shrink during drying, completely transparent, and shows excellent mechanical properties, especially resistance. Learn how easy it is to make a river table: Epoxy resins can be mixed with "candy” pearl or translucent shades or pigments. This opens a whole world of extraordinary decorative possibilities. They are called "River Tables" because of their coloured and pearl epoxy casting effect on resin holding two pieces of raw wood, thus reminding us a river which flows across the land. It’s also possible to make a table with casting and phosphorescent inlay. Resoltech Resin: Pro technology products Arco Iris distributes resins from Resoltech, a French company specialized in epoxy resin technology. Always on the cutting edge of innovation, the new resins are more translucent and more resistant to UVs Here are our epoxy resins for "River Table", in wood, concrete, etc. - Thick WWA Epoxy Resin known as "casting" (1-30cm) - 4000 Epoxy Resin, extra thick glaze (0.1-1cm) - 1010 Epoxy Resin, water-based product for impregnation or clear coating
  • Spraygun and airbrush
    A range of spray paint guns and gravity or suction feed airbrushes, as well as spare parts and other accessories. For amateur painters: Do not hesitate to contact us for advice, in order to select the complete equipment necessary to realize paintings on motorcycle / scooter / body parts. Spray guns, hoses and pneumatic threads, everything can be found on our site. A 50 Litres air compressor available in supermarkets and specialty stores will provide the sufficient air intake to paint and clearcoat a motorcycle. Stock: All items are in stock and shipped from our warehouse in the Gard area (Zip code 30) in 48H to UK, for all orders placed before 3PM.
  • Accessories
  • Tactile signalization
    Tactile paving signalization refers to ground equipment, with studs arranged regularly, which the blind and visually impaired can feel with their feet, warning them of immediate danger or obstacle, creating a visual and tactile contrast. These elements may be made of metal, concrete and various types of plastics, they are sold as nails, plate or strip. They are recommended by European regulations for transportation and urban planning. The finished installation is called "Hazard Tactile Warning Strips" (BEV). We provide plates, podotactile nails, but also photoluminescent nails. Each of these items is always in stock, so they can be delivered in 24/48 hours.
  • Protective Equipment
    During painting works with harmful and flammable products, it's very important to respect the safety instructions: - Ensure adequate ventilation in rooms you are painting to allow the evacuation of solvent and paint fumes - Protect your eyes, skin and respiratory system For this purpose, StardustColors offers a complete set of high quality items, to ensure the complete safety of the painter during the handling and application of solvent-based and water-based paints. Gerson respirator masks and Starchem products
  • Phosphorescent Papyrus
    This is a true work of art around the mysteries of Egypt, designed in a small Egyptian traditional workshop, in unique series of 10 copies. Our phosphorescent Papyrus are bright at night: During the day they display a scenery, and show up luminescent colours when the day light fades...
  • Phosphorescent gems, pearls and jewellery
    ArcoIris SAS offers a wide range of phosphorescent gems, pearls and even jewellery. These precious stones have a natural luminous power. They are finely cut and polished, and some are pierced. The stones are very hard and indestructible. In the dark, they display a green, turquoise or blue luminescence. These mineral synthetic stones are available from stock in various diameters from 6mm to 30mm, into a round or oval shape, and in different package sizes.
  • Special effects paints
    Here is a rare selection of amazing paints, called special effects paints, to produce quite exceptional colour, light or reaction effects. Special effect paints differ from classic paints by their very specific properties allowing them: - to react to the external environment, in the same way as "alive" and reactive paint - to present a variable or extraordinary coloured appearance. Their characteristics provide them with opportunities in many application areas (security, decoration, industry). Any object can be painted to obtain an amazing visual aspect. Special effects paints are of course technical paints, rare and expensive.
  • Screen printing inks
    We manufacture a range of acrylic inks for printing on T-shirts and textiles, solvent-free, 100% water-based, with free-air or tunnel drying. Our inks produce rare and original special effects. Screen printing is a printing technique used especially for fabrics, but also cardboard, paper, PVC, for which a sieve is used to transfer the ink to the fabric or the surface, with the exception of masked areas.

Active filters